A small, calibrated sensor package with its own data acquisition module, built for one industry-specific job in testing or manufacturing. Plug it into a phone or tablet, carry it into the field, and start recording.
An eight-channel temperature and humidity package: hub, probes and tablet, ready to log.
How it fits together
Every sensor in the CL-Link line speaks I2C over standard 4-pin M12 circular connectors. Each module has a male and a female end, so you daisy-chain as many sensors as the job needs, in parallel, on just two data lines. Up to 127 devices can share one bus. A small in-line microcontroller module sits on the chain, and a phone or tablet powers it over USB and records the data.
Some arrangements may use larger acquisition modules with a separate port for each sensor, for sensors that don't use I2C, such as thermocouples. With simple USB hubs, multiple modules can also run in parallel while fully integrating with the same software that records and analyses the data.
CL-Link sensor modules
I2C sensor modules on IP67 M12 over-molded cables and panel-mount connectors. Calibrated before they ship.
CL-LC24
In-line load cell amplifier
An ultra-low-profile, aluminium-housed, in-line 24-bit ADC with a precision voltage reference and a programmable gain amplifier. It works with any full-bridge strain gauge load cell, S-type or parallel beam.
24-bit resolution
Programmable gain
Precision voltage reference
CL-WX
Weather module
Temperature, humidity and barometric pressure, with a high sample rate, high accuracy and fast response. Most humidity sensors are slow to respond, but this one picks up a change right away. Use it to apply climate correction factors to your measurements automatically.
Temp · RH · barometric
Fast humidity response
Automatic climate correction
CL-DP100
Differential pressure transducer
±100 mbar differential pressure for fenestration (window and door) testing, built around a high-accuracy, high-resolution Honeywell transducer. It's rated for millions of pressure cycles, including severe over-pressure, without needing recalibration.
±100 mbar differential
Millions of cycles
No recalibration needed
CL-HP
Hydraulic and pneumatic pressure
Pressure transducer modules for load testing driven by hydraulics or pneumatics. Pair one with a CL-WX on the same two data lines to apply correction factors in pneumatic flow-rate work.
Hydraulic or pneumatic
Range chosen for your application
CL-TH8
Eight-channel temperature and humidity
Eight dual temperature and humidity probes on a single module. Use it to map a chamber, an oven, a curing room or a whole production line.
8 channels
Dual temp + RH probes
Flow rate
Flow rate sensor
An inline flow sensor that plugs onto the same M12 chain as the other CL-Link sensors, so flow is logged alongside weather, pressure and load.
CL-TC
Thermocouple module
Thermocouple inputs with cold-junction compensation, for high-temperature work that standard probes can't handle.
Thermocouple inputs
Cold-junction compensated
CL-DX
Deflection and displacement
Measure deflection under load alongside force and pressure on the same bus, so every reading lines up in time.
Deflection · displacement
Time-aligned with load data
In development
Motion and vibration
We're developing a wider range of instruments, including sensors for motion, vibration and displacement. Need something that isn't listed? Ask us.
Data acquisition modules
The modules that sit between your sensors and your screen.
CL-Link MCU
In-line microcontroller module
A small module that sits on the M12 chain and runs the whole I2C line. Power it from a phone or tablet over USB, so there's no separate supply to carry into the field.
Up to 127 devices per bus
USB powered
Windows and Android
Example chain
Flow and weather on one MCU
A flow rate sensor and a weather module, both plugged into a single in-line MCU, which runs on USB from the phone or tablet.
CL-Hub
Application-agnostic acquisition hub
A larger module with a separate connector for each sensor. It's housed in extruded aluminium with silicone rubber molded corners and has M12 interconnects. Everything is IP67 rated against submersion, impact and debris, including the USB port.
IP67 throughout, IP67 USB
Extruded aluminium, silicone corners
Open source electronics hardware
Final enclosure design pending.
CL-Scale
Multi-channel load cell module
Made for platform scales with four or more load cells. It reads each cell on its own channel, so you get the total weight and can also see how the load is spread across the platform.
The photo shows one example arrangement: an in-line 24-bit load cell ADC (CL-LC24), an in-line MCU module that daisy-chains over M12 connectors with splitters, and a CL-DP100 differential pressure transducer. Many arrangements can be made from these same modules.
4+ load cell channels
S-type or parallel beam
Software for Windows and Android
CL-Studio
Graphing, data logging and analysis
A full-featured application built for tablets. Record data, chart it and analyse it, from a quick test in the field to months of continuous logging.
Slide-out toolbars on all four edges of the screen, built for touch.
Graph tools, analysis tools and indicators, with a full New / Open / Save / Save As file menu.
Import and export: XLS, CSV, SQLite, JPG, BMP, PNG and PDF.
Zoom like a map. Database optimisations let you pan and zoom through months or even years of data, with more detail appearing as you zoom in. It stays fast and light on any amount of data.
Runs on Windows and Android, so you can record on a phone in the field and analyse on a tablet or PC.
Calibrated sensor packages
This is what we really sell. You tell us what needs measuring. We choose the sensors, calibrate them, build them into one package with the right acquisition module, and set up the software for your test. We'll work with your calibration lab to meet your requirements, train your staff on site, and make software changes quickly and affordably, with AI-assisted development. Some examples:
Window and door testing
A CL-DP100 differential pressure transducer plus a CL-WX weather module on the same two wires. Climate corrections are applied automatically during fenestration tests.
Load and materials testing
CL-LC24 load cells, CL-HP hydraulic or pneumatic pressure and CL-DX deflection on one chain, all time-aligned for force-versus-deflection curves.
Platform and process scales
A CL-Scale module with four or more load cells, for weighing, checkweighing and fill monitoring on the production line.
Environmental mapping
CL-TH8 and CL-TC modules for chambers, ovens, curing rooms and warehouses, logged for months and reviewed in minutes.
Field kits
Sensors, a CL-Link MCU and a phone. Plug in, carry it around the site, and bring the data back to the office.
Behind every package is our library of tested designs. It includes bills of materials, breakout boards for 24-bit ADCs, and interface boards for a wide range of digital and analogue sensors. This is why we can turn a new sensor package around quickly.
24-bit ADC breakouts
Precision front ends for strain gauges, bridges and low-level analogue signals.
Sensor interface boards
Proven circuits for digital and analogue sensors, including pressure, force, temperature, humidity and barometric sensors.
M12 cables and connectors
IP67 over-molded cables, panel-mount connectors and internal interconnects, with production sourcing finalised.
BOMs and documentation
Every design comes with a full bill of materials, so packages can be built repeatably and supported for years.
Prototypes and internals
Inside the hub: M12 panel-mount connectors, twisted-pair internal wiring and open source microcontroller hardware. These are early-generation builds. Production enclosures are still being finalised.
Hub enclosure: extruded aluminium with silicone rubber cornersM12 panel-mount MCU harnessMulti-load-cell prototypeVarious prototypesDaisy-chainable sensors with standard M12 cabling
Have a test in mind?
Tell us what you need to measure and where. We'll suggest a sensor package.